Here is our final video in the series illustrating the working of hydrocarbon gas detecting sensors. This time, we show the basic mode of operation of an infrared (IR) sensor for flammable gases.
Infrared emitters within the sensor each generate beams of IR light . Each beam is of equal intensity and is deflected by a mirror within the sensor on to a photo-receiver, which measures the level of IR received. The “measuring” beam, with a frequency of around 3.3μm, is absorbed by hydrocarbon gas molecules, so the beam intensity is reduced . The “reference” beam (around 3.0μm) is not absorbed, so arrives at the receiver at full strength. The %LEL of gas present is determined by the difference in intensity between the beams measured by the photo-receiver.
Having recently shared our video on pellistors and how they work, we thought it would make sense to also post our video about PID (photo-ionisation detection). This is the technology of choice for monitoring exposure to toxic levels of another group of important gases – volatile organic compounds (VOCs).
Pellistor gas sensors (or catalytic bead gas sensors) have been the primary technology for detecting flammable gases since the ‘60s. Despite having discussed a number of issues relating to the detection of flammable gases and VOC, we have not yet looked at how pellistors work. To make up for this, we are including a video explanation, which we hope you will download and use as part of any training you are conducting
Gas detectors are there to save your life, whether it is a fixed system or a portable detector, keeping them well maintained is an important part of ownership.
Our guest blogger this week, Julian, has put together simple steps to ensure your gas detector is up for the job as and when it’s required.
