Specifications
Size |
200 x 115 x 115mm (7.9 x 6.1 x 6.1ins) |
Weight |
2.2kg (4.9lbs) |
Ingress protection |
IP65 |
Enclosure material |
Junction box: Marine grade alloy
Sensor housing: 316 stainless steel |
Power |
10-30Vdc, 210mA max (relay version)
160mA max (non relay) |
Cable entries |
2 x M20 or 1/2” NPT |
Operating temperature |
-10°C to +55°C (-14°F to 131°F) * |
Humidity |
15 to 90% RH non-condensing |
Relays (optional) |
SPNO or SPNC contacts rated
30Vdc 1A (non-inductive load) for Alarm 1, Alarm 2, Fault |
Display |
3-digit LCD back-lit display, LED status indicator |
Calibration method |
Via magnetically operated buttons |
Electrical output |
3 wire 4-20mA, sink or source |
Terminals |
Suitable for up to 1.5mm2 cable |
Sensor type |
Electrochemical |
Repeatability |
+/- 2% FSD typically |
Zero drift |
+/- 2% FSD, 6 months typically |
Response time |
Contact Crowcon for a full list of sensor response times |
Performance |
Tested in accordance with EN60079-29-1 |
Hazardous area zones |
Zone 1 or 2 |
Approvals |
Ex II 2 G
Ex db IIC T6 Tamb -20°C to +55°C |
EMC compliance |
EN 50270, FCC: CFR 47 Part 15, ICES-003 |
* Figures shown exclude the sensors – Please contact Crowcon for a full list of sensor operating temperatures
Gases and Ranges
Gas |
Range Available |
Carbon monoxide (CO) |
100, 250, 500, 1000ppm |
Hydrogen sulphide (H2S) |
25, 50, 100, 200ppm |
Oxygen (O2) |
25% vol. |
For a full list of gases download the datasheet or contact Crowcon.
Accessories
Below is a small selection of the accessories available for the TXgard Plus.
Spray deflector
C01052
For use outdoor installations and to protect from water sprays, for example in water treatment or food processing plants. For extremely wet environments eg: offshore installations, use weatherproof cap, CO1442, instead.
Weatherproof cap
C01442
For offshore or other extremely wet environments in place of spray deflector.
Stainless steel flow adaptor
C01688
For use where a gas sample is being piped to the detector.
Exd Cable Gland Adaptors
ATEX certified Exd cable gland adaptors.
Exd/Exe Certified Brass Cable gland
M02354
Suitable for Steel Wire Armoured cables with outside diameter 15.5mm to 21.1mm (inner sheath 6.7mm to 14mm). Certified to ATEX (ll 2DG, Exd llC/Exe ll), IECEx, CSA, GOST-R and NEPSI standards. M20 x 1.5mm thread. Ingress protection to IP66/67/68.
Calibration adaptor
C03005
To enable calibration gas to be applied to the detector. One adaptor can be used for several detectors.